Firmware
Firmware copied to clipboard
OpenShock
Espressif Firmware for OpenShock, Controlling shock collars via Reverse engineered proprietary Sub-1 GHz Protocols.
Bumps the frontend group in /frontend with 6 updates: | Package | From | To | | --- | --- | --- | | [@sveltejs/kit](https://github.com/sveltejs/kit/tree/HEAD/packages/kit) | `2.5.8` | `2.5.9` |...
![dependabot[bot] avatar](https://avatars.githubusercontent.com/in/29110?v=4 "dependabot[bot] avatar"){kind=avatar}
### Pre-submission checklist - [X] I checked that no other Bug Report describing my problem exists. - [X] I am running the latest stable or prerelease firmware. - [X] My...
Allows enabling/disabling EStop without needing to change the compile-time constant. Default pin is still obtained via `OPENSHOCK_ESTOP_PIN` Using a pin of 0 (`GPIO_INVALID` in Common.h) in either the Captive Portal...
See: https://discord.com/channels/1078124408775901204/1157221049281302538 ## Development - [x] Add to CI - [x] Configure status LED - [ ] Configure TX pin if applicable ## Testing - [x] Test board boots -...
This would require specifying the BSSID in the connect command and requires some way to store these in the config together with normal network credentials
### Pre-submission checklist - [X] I checked that there is no other Feature Request describing my wish. - [X] I checked that this feature is, in fact, not supported. -...
### Pre-submission checklist - [X] I checked that there is no other Feature Request describing my wish. - [X] I checked that this feature is, in fact, not supported. -...
### Pre-submission checklist - [X] I checked that no other Bug Report describing my problem exists. - [X] I am running the latest stable or prerelease firmware. - [X] My...
 Board is `Seeed Xiao ESP32-S3`