OpenOlitor
**Fehler Zeiten bei Arbeitseinsätze multiplizieren**
Arbeitseinsätze multiplizieren Bei multiplizieren einer Arbeitseinsatz, stehen die Zeiten "plötzlich" 2 Stunden später. Als ich sie mutlipliziert habe, vor einer Woche, waren sie mit der korrekten Zeit drauf. Jetzt: siehe Screeshot : Titel und Zeiten vergleichen...
Wie kann ich auf ein Mal mehrere Arbeitseinsätze "editen" oder löschen ?
Du beziehst dich offenbar auf Arbeitsangebote nicht Arbeitseinsätze.
Die verschobene Zeit beim Duplizieren ist natürlich ein ~Bug. Danke für den Report.
Mehrere Arbeitsangebote gleichzeitig editieren geht nicht. Löschen allerdings schon: Einfach die zu löschenden Einsätze links auswählen und rechts im Drop-Down die Löschen-Funktion wählen.
Hallo Alwin
Genau, es geht um Arbeitsangebote, nicht Arbeitseinsätze. Sorry.
Ich habe probiert, die Arbeitsangeboten (etwa 8) vom 22.08.2023 zu löschen. Mit Häckchen. Möglichkeit „Arbeitsangebot löschen“ ist available im Menu, aber es löscht nicht.
Erst wenn ich das Arbeitangebot zurückziehe, dann lösche, dann ist es weg.
Und zum „zurückziehen“ muss ich jede einzelne Arbeitsangebot editieren. -> was ein no go ist für die 160 Arbeitsangeboten… 😉
Danke im Voraus für deine Hilfe.
Lieber Gruss
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Alwin @.> Sent: Mittwoch, 22. März 2023 13:49 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Author @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Du beziehst dich offenbar auf Arbeitsangebote nicht Arbeitseinsätze.
Die verschobene Zeit beim Duplizieren ist natürlich ein ~Bug. Danke für den Report.
Mehrere Arbeitsangebote gleichzeitig editieren geht nicht. Löschen allerdings schon: Einfach die zu löschenden Einsätze links auswählen und rechts im Drop-Down die Löschen-Funktion wählen. https://user-images.githubusercontent.com/4997364/226909299-11bdf03f-b8c0-4cde-9375-d41f6cd04cc9.png
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1479513272 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC32BKMZQNYHRHFAOP3W5LYK5ANCNFSM6AAAAAAWCLTV5E . You are receiving this because you authored the thread. https://github.com/notifications/beacon/AV46NCZXNPLMPO2O4LZFOQDW5LYK5A5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTSYF6KLQ.gif Message ID: @.*** @.***> >
Hallo Alwin Die Arbeitseinsätze löschen sich nicht auf meinem Portal.... Die Zeiten sind immer noch verschoben... wir passen sie Schritt für Schritt an, aber es ist sehr zeitaufwändig.
Könntest du mir bitte helfen, damit ich dieses Problem lösen kann? Danke im Voraus für deine Rückmeldung.
Hi @PascaleGG ,
I can help you. Can you tell me which time is the correct one?? the description time or the programmed time??
Hi Mikel! Description is correct. Pascale GrossenbacherSecrétariat TerreVision079 569 43 69On 2 Jun 2023, at 12:51, Mikel Cordovilla Mesonero @.***> wrote: Hi @PascaleGG , I can help you. Can you tell me which time is the correct one?? the description time or the programmed time??
—Reply to this email directly, view it on GitHub, or unsubscribe.You are receiving this because you were mentioned.Message ID: @.***>
Hi Mikel !
Did you get my message?
The correct times are in the description.
The times in the programmed time are 2 hours delayed.
Is it a bug that can be fixed?
- Because changing each shift is too much monkey work
- I tried deleting and re-doing the shifts, but I cannot delete several dates at once when they are “ freigeschaltet”.
Thank you for your help. Here’s my number in case: 079 569 43 69.
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Freitag, 2. Juni 2023 12:52 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Hi @PascaleGG https://github.com/PascaleGG ,
I can help you. Can you tell me which time is the correct one?? the description time or the programmed time??
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1573535045 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC7NWEMHYPD44RZCR4LXJHAU3ANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned.Message ID: @.***>
Hi @PascaleGG ,
I have made the changes of the times. Now they should be correct. I will be working on the bug this week. I let you know when a resolution is deployed
Have a good evening
Hi @PascaleGG
I have made sure that everything is right now correctly working. The problem was related to a wrong configuration of the timezone after an unexpected outage. Have a good day
Thank you Mikel!!! Fantastic! Have a great day.
Pascale
From: Mikel Cordovilla Mesonero @.> Sent: Mittwoch, 7. Juni 2023 11:25 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Hi @PascaleGG https://github.com/PascaleGG
I have made sure that everything is right now correctly working. The problem was related to a wrong configuration of the timezone after an unexpected outage. Have a good day
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1580290393 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC4DS2XUQH5JFLVBXVTXKBCHFANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AV46NC363VSMJ7T6TBPLR3LXKBCHFA5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTS6GFIVS.gif Message ID: @.*** @.***> >
Hi Mikel Sorry to have to get back to you, but the bug is back. I added Arbeitsangebote till December. The times were correct for a few hours and then again are shown 2 hours later than in the description. Could you please fix that for us ? and let me know if I'm doing something wrong? Thank you. Have a nice day! Pascale
Hi @PascaleGG ,
I have a theory about what may be happening to you. The "time" field in the "work opportunities" section takes into account the time zone. That's why, in case all the computers from where you create the "work opportunities" and view them are not in the same time zone, OpenOlitor will adapt the time to always show the local time. In the following video you can see what would happen in case of creating the "work opportunities" in Iceland (GMT) and how it would look like in Switzerland (CEST). You see the time and the time zone at the bottom of the screen.
You can check the time zone of all computers from which you use openolitor. In case you are in different time zones, you have to take this difference into account when entering the times for each event.
Hi Mikel
Thank you for looking it up. The slots are created from my computer and here are the settings :
So I’m not sure what I can change… so it does not happen anymore…
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Donnerstag, 6. Juli 2023 16:31 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Hi @PascaleGG https://github.com/PascaleGG ,
I have a theory about what may be happening to you. The "time" field in the "work opportunities" section takes into account the time zone. That's why, in case all the computers from where you create the "work opportunities" and view them are not in the same time zone, OpenOlitor will adapt the time to always show the local time. In the following video you can see what would happen in case of creating the "work opportunities" in Iceland (GMT) and how it would look like in Switzerland (CEST). You see the time and the time zone at the bottom of the screen.
You can check the time zone of all computers from which you use openolitor. In case you are in different time zones, you have to take this difference into account when entering the times for each event.
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1623786774 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC3YCOHH6BFH3OKYF5LXO3DZTANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AV46NCY7RKKF4RAPDRM4UATXO3DZTA5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTAZECRM.gif Message ID: @.*** @.***> >
Hi @PascaleGG ,
I cannot see your config. Could you send it again please?
Other questions to check: are you using any vpn in another time zone? any remote connection ??
Hmmm
So I disabled “able to connect” to VPN Networks, although I am not connected to one.
And no, I am not using any remote connection…
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Freitag, 7. Juli 2023 13:50 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Hi @PascaleGG https://github.com/PascaleGG ,
I cannot see your config. Could you send it again please?
Other questions to check: are you using any vpn in another time zone? any remote connection ??
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1625296303 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC7ZRIVLKBZXDUMYZJTXO7ZXFANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AV46NC6V6TBFYVEP74DLHL3XO7ZXFA5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTA4AG26.gif Message ID: @.*** @.***> >
ok, I suggest that the next time you will create new events, please, make a test with 1 or 2. In case you see the wrong behavior, please, extract the timezone and location configuration and send it to me. We will analyze it before moving forward.
Ok! Will do. Thank you for your help.
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Montag, 10. Juli 2023 12:14 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
ok, I suggest that the next time you will create new events, please, make a test with 1 or 2. In case you see the wrong behavior, please, extract the timezone and location configuration and send it to me. We will analyze it before moving forward.
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1628647741 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC6SWICS7AZDYAE6WJTXPPIVFANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AV46NC5D4WCSWFHDRI6AZYTXPPIVFA5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTBCMYT2.gif Message ID: @.*** @.***> >
Hi Mikel
I created 3 new working shifts.
When I create them and add the time manually, the time stays as I want.
When I multiplied an existing shift, the time shown was 10.00-12.00. instead of 17h-19h, or 19h-21h.
This happendend with all three shifts, that I multiplied once each.
On the picture, I have then manually adapted the time of the last line.
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Montag, 10. Juli 2023 12:14 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
ok, I suggest that the next time you will create new events, please, make a test with 1 or 2. In case you see the wrong behavior, please, extract the timezone and location configuration and send it to me. We will analyze it before moving forward.
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1628647741 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC6SWICS7AZDYAE6WJTXPPIVFANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned.Message ID: @.***>
Hi @PascaleGG ,
I have fixed it. A new release was done and it is right now fixed in production. Could you please check and let me know of any problem??
Hi Mikel,
Thank you.
I multiplied a few shifts over Christmas 2023.
What I see is, the 1hour shifts stayed with the correct time, the 2hour shifts did not. They are registered 1 hour later as wished/announced in the label.
Pascale
Secrétariat TerreVision
http://www.terrevision.ch www.terrevision.ch
@.> @.
077 455 79 33
From: Mikel Cordovilla Mesonero @.> Sent: Freitag, 21. Juli 2023 13:02 To: OpenOlitor/OpenOlitor @.> Cc: PascaleGG @.>; Mention @.> Subject: Re: [OpenOlitor/OpenOlitor] Fehler Zeiten bei Arbeitseinsätze multiplizieren (Issue #137)
Hi @PascaleGG https://github.com/PascaleGG ,
I have fixed it. A new release was done and it is right now fixed in production. Could you please check and let me know of any problem??
— Reply to this email directly, view it on GitHub https://github.com/OpenOlitor/OpenOlitor/issues/137#issuecomment-1645400538 , or unsubscribe https://github.com/notifications/unsubscribe-auth/AV46NC373YLTME42TOGOZ7DXRJOSLANCNFSM6AAAAAAWCLTV5E . You are receiving this because you were mentioned. https://github.com/notifications/beacon/AV46NC5WJQ7BLZUUASUTX53XRJOSLA5CNFSM6AAAAAAWCLTV5GWGG33NNVSW45C7OR4XAZNMJFZXG5LFINXW23LFNZ2KUY3PNVWWK3TUL5UWJTTCCLI5U.gif Message ID: @.*** @.***> >
Hi @PascaleGG ,
I am sorry to hear that this is still not having the desired behaviour. I have made a new change that you can check in the testprod environment. You can access it from here: https://terrevision-test.openolitor.ch/admin the user is the same adding test- at the beginning. Password is the same I have imported the prod data that you can check it as close to production as possible.
Please, let me know of any issue