opm-material

opm-material copied to clipboard

Due to linear extrapolation we can get negative invB (b) factors for some setup of the PVT tables when computing well potentials for default pressure (i.e. 1 atm) ``` PVDG...

totto82

Remove class EclHysteresisConfig - use Opm::EclHysterConfig

1

Was about to make some small validation inspired refactoring to the EHYSTR configuration in opm-common; remove this shim class to avoid double work.

joakim-hove

[Build System] Introduce Boost.Test as an Optional Prerequisite

2

I'm about to do some work on vertical scaling of saturation functions, especially the features that are introduced by the ECLIPSE keywords `KRWR`, `KRGR`, `KRORW`, and `KRORG`. As part of...

bska

these are hard requirements now. Downstream of https://github.com/OPM/opm-common/pull/1129

akva2

end point scaling: add support for the SWLPC, SGLPC, ISWLPC, and ISGLPC keywords

4

this was quite a bit easier than I thought...

andlaus

Runs with no disgas and PVTO present runs without warning. flow fail without usefull message if no oil pvt is pressent in deck

1

There is no checking of consistency in OilPvtMultiplexer.hpp (line 125-126) Also if no oil properties is present flow fails without usefull meassages.

hnil

Are permeability and capillary pressure lookup saturations correct?

1

I was reading through some of the opm-material codes. Some of the lookup saturations that are used in some of the classes (i.e. EclDefaultMaterial and EclStone1Material) seemed a little odd...

hosein1984

Mixing energy

2

Modifications to make energy module for black oil to not only gennerate termperature due to the entalpy/work term. This is physical since we assume the energy density only depend on...

hnil