EthernetENC
EthernetENC copied to clipboard
Networking-for-Arduino
Ethernet library for ENC28J60. This is a modern version of the UIPEthernet library. EthernetENC library is compatible with all Arduino architectures with Arduino SPI library with transactions support....
Hi... I am trying this example to use your library with ESP32 and ENC28J60 shield. `` #include #include // Enter a MAC address and IP address for your controller below....
Hi, I'm trying to begin webthing with enc28j60. I used your library but, when I start the webthing adapter(adapter->begin();) ESP reboot constantly. Have you ever tried to use these two...
Hi, I use the library with the Nano Ethernet Shield on an ESP32 Dev Kit-C. I also use the PubSubClient-Library to send MQTT messages. After some time (varies between some...
I am finding that any packet more than 18 bytes is not being received by following code. #include #include // Enter a MAC address and IP address for your controller...
Is it possible to broadcast a message on UDP ? I tried with 255.255.255.255 as IP address in UDP.beginPacket. It does return 1, however, message is not sent on the...
Hello; I am having the same problem with EthernetENC as I did with UIPEthernet. That is the stack stops receiving packets. You fixed the problem and afterwards the code ran...
Good evening, can anyone help me? I'm using this LIB in a project where I have some buttons connected to the arduino and whenever someone presses a button I consump...
Hi everyone. I am using atmega2560+enc28j60+rc522 rfid reader in my project. Last days, i'm struggling an interesting problem. Sometimes everything is working well but sometimes i am getting an error....
I've just tried to use the EthernetENC library with the DHCP Address Printer example, and get the following output: ``` Initialize Ethernet with DHCP: udp beginPacket, rip: 255.255.255.255, port: 67...
Spent several hours and still can't find how to do it. I can not send UDP to a custom IP address, only to the one with which a connection is...
Metadata
Owner
Metadata
Ethernet library for ENC28J60. This is a modern version of the UIPEthernet library. EthernetENC library is compatible with all Arduino architectures with Arduino SPI library with transactions support....