Nitehawk-SB
Nitehawk-SB copied to clipboard
MotorDynamicsLab
A USB toolboard for the Voron Stealthburner Toolhead
CAD files missing for the Nitehawk To be able to make mounts for the usb adapter
New printer build. Both the control board and NHK mcu id's seen. Klipper update using LDO doc instructions (Klipper Make Upload) performed. MCU is now not seen. Hard reboot, still...
The board this product ships with is labeled LDO motors USB adapter v1.4. Yet I see no mention of it anywhere on this repo. Is that an oversite or intentional?
> sudo dmesg shows > usb 1-1-port4: connect-debounce failed when I'm trying to use lots of different USB cables, including the one which goes from raspi to octopus board and...
I am running a BTT Manta E3EZ with a CB2, I cannot get nighthawk to connect to klipper, I have completely reflash nighthawk still no success, please help.
My Nitehawk keeps disconnecting about an hour into each print. At this point I have checked all connectors multiple times, made sure things don't overheat (47C max temperature), re-flashed Klipper,...
If you are having weird issues, check the running temperature! It took me two weeks to find out the under/no extrusion issue with the Nitehawk SB toolhead with Stealthburner/Galileo2. It...
In the IO ports, there are 2 pins connected to GPIO2 and GPIO3: `FS` and `SU`. Does `FS` mean "Filament Sensor"? What does `SU` stand for? Can they be used...
1.40mm square ferrules do not fit this header. This is a very common ferrule size that typically comes on stock v6 hotends. Recommend you substitute original P6 part with TE...
Metadata
Owner
Metadata
A USB toolboard for the Voron Stealthburner Toolhead