[BUG] Movement issue with Artillery Genius & BL-Touch

[VoOoUoOoV]

Bug Description

I am Using Artillery Genius (not pro edition) If BL-Touch is on, the movement in X axe with more then 210mm is wrong because the Z axe will move up/down (TMC2100 / TMC2209) too. Is X > 210 and i move Y axe, the Z axe is moving too.

Configuration Files

Marlin2.1.1.0_Configs___C_7.zip

Steps to Reproduce

• Get extruder head to x default (left position)
• Turn Printer on
• Activate BL Touch / 3D Touch (M420 S1)
• Use terminal or TFT Screen to move X axe over 210 mm
• When move Y axe (and X axe is >= 211mm), Z axe moves too

Expected behavior:

X axe driving normal Y axe does not let Z axe move.

Actual behavior:

X axe and Z axe are driving (both at same time), if X axe > 210 mm Y axe and Z axe are driving (both at same time), if X axe > 210 mm

Additional Information

The strange behavior happens with Marlin 2.0.9.3 + 2.0.9.5 + 2.1.0.0 + 2.1.1.0

[VoOoUoOoV]

I just found out, if i change @ Configuration.h the size from 220 to 230, i get the same behavior, but with an offset of 10. Therefore i changed to 240 and the rising Z axe would start at 230.

My max Bed Size is 230x230. But i still belive it should not happen (rising z axe)

Now i set it back to max 230, because ABL tries to get outside 230...