MarkWattTech-Tutorials
MarkWattTech-Tutorials copied to clipboard
MarkWattTech
A Collection of Code from Various MarkWattTech Videos
Great script, still missing an auto dimming function, or the screen remain to max brightness all the time.
All is working great, except using the official 7inch screen, it's upside down. Everything I find says to add lcd_rotate=2 to /boot/firmware/config.txt, but this is not solving the issue.
After following this guide to a tee, I attempted a reboot and was met with a failure to start X.org...the error looked like this: ``` Cannot run in framebuffer mode....
This 'issue' serves as additional notes for things to do / avoid: 1. If your home assistant interface has any double byte and/or UTF-8 characters, they will not be displayed...
Well made tutorial, except I noted one additional command that is needed between Steps 1 & 2. In the video you execute 'sudo raspi-config', changing the display settings and auto-login....
I'm not sure what's going on, but after following all of the tutorial for the kiosk on my RPi3b, when it boots, it loads the UI as expected, but the...
When Chromium fires up, the tab I have loading for HA shows up in what appears to be a 4:3 box in the middle of a very wide-screen monitor, which...
Command 4: # Remove exit errors from the config files that could trigger a warning pi@HA-Display1:~ $ **sed -i 's/"exited_cleanly":false/"exited_cleanly":true/' ~/.config/chromium/'Local State'** _sed: can't read /home/pi/.config/chromium/Local State: No such file...
I have setting everything as you and it's perfect. I have added by ssh and browser_mod 2.0 the control about the screen for power on or off the screen only...
Hi @MarkWattTech I have followed up the instruction and then the videos. And after some time, I found out you are pointing out the kiosk to another IP rather than...
Metadata
Owner
Metadata
A Collection of Code from Various MarkWattTech Videos