Manuel

Hi Revar, I was under the impression, that the groves in that gear would off center the filament path into the extruder. And did not use it. Is this the...

Hello Revar, I know but I mean not in the X direction where I can slide the gear into position. I mean in the y direction. So to speak that...

Hi I printed the yz joiners as well and did not have this issue. I used slicerPE to slice it.

Thanks for the Info! May i ask, why they are incorrect ? Thanks!

Found it: curl -u USER:PASSWD --header "X-Api-Key: ????" 192.168.0.220:80/plugin/filament/status In the config has to be: octoprint_filament Send this command from the pi :-)

Hi When is use octoprint_filament i get: tom@prusa ~ $ curl -u --header "X-Api-Key: " 192.168.0.220:80/plugin/filament/status 503 Service Unavailable No server is available to handle this request. tom@prusa ~ $...

Hi Yes my config looks like this: octoprint_filament: bounce: 400 filament: 1 pause: 1 pin: 14 However i used octoprint_filament because it would not work otherwise. I can post the...

Hi ovidiu No I found that "filament" does not work in the config. So i use in the config "octoprint_filament" This however does not work in the source code so...

@cryinkfly First let me say that this is awesome! I finaly can use fusion without vmware! I tried the key combos to restrict the floating windows to the Fusion 360...

Runs great on Archlinux with free amdgpu driver. Autodesk Fusion 360: 2.0.10813 Graphics card model: Advanced Micro Devices, Inc. [AMD/ATI] Navi 22 [Radeon RX 6700/6700 XT Graphics card driver: mesa...