Jarrod Smith

Same issue here. Recent model dig-Quad running two strands of 12V BTF WS2814 (128 and 169 logical LEDs). LED data pins 1, 3, and 4 (GPIO 16, 1, and 4...

> [@MakerMatrix](https://github.com/MakerMatrix) yes it was explained (elsewhere). GPIO don't matter but number of LEDs do. If you use more than 300 LEDs per output, WLED will use RMT peripheral for...

I am sorry to report that 0.15.1-beta2 does not fix the problem I am hitting. The "blends" effect makes the flickering most readily and immediately apparent.

OK I see it in the changelog for 0.16-alpha (the nightly build) so let's get that mentioned in here too. WS281x leds flickering every firmware after WLED 0.15.0-b3 https://github.com/wled/WLED/issues/4211

I was prompted to report this here - It seems there are ongoing issues with the RMT driver in 0.15.0 through 0.15.1-beta2 (possibly some of the 0.15.0 betas as well...

> [@MakerMatrix](https://github.com/MakerMatrix) That's right. But check the status in that topic (I admit it's long and I have only skimmed through it myself). It seems the issue is RMT and...

Pretty sure when I observed this, the four phantom outputs were WS281X and were at the end of the list. I had two physical WS2814 outputs defined first.

> Please use the same type for all outputs and report back. It doesn't matter, no blue with all configured as SK6812/WS2814

[Issue-4719-cfg.json](https://github.com/user-attachments/files/20697330/Issue-4719-cfg.json) config.json attached. All of the physical LED strips (two in the current config) are the same - and in the final config (four) will all be the same. These...

Any new thoughts on what causes this issue? I have provided the requested info above.