MightyCore
MightyCore copied to clipboard
MCUdude
Arduino hardware package for ATmega1284, ATmega644, ATmega324, ATmega324PB, ATmega164, ATmega32, ATmega16 and ATmega8535
The error log is extensive, but it simply complains about _BV being out of scope. This can be reproduced by compiling Marling on branch bugfix-2.0.x (I haven't tried the 1.1...
I have an ender 3 with a V1.1.3 board. I downloaded the 1.1.x marlin files, and copied over all the example files from the Ender-3 folder. I followed every instruction...
The main Arduino Wire library has a setWireTimeout method, which is very useful for dealing with unreliable wire connections (which I seem to have on my setup for...reasons?). Regardless, planning...
I have connected 8 QTRA sensors from A0 to A8 on an ATMEGA16PU1603K ` void setup() { Serial.begin(9600); } void loop() { Serial.print(analogRead(A0)); Serial.print('\t'); Serial.print(analogRead(A1));Serial.print('\t'); Serial.print(analogRead(A2));Serial.print('\t'); Serial.print(analogRead(A3));Serial.print('\t'); Serial.print(analogRead(A4));Serial.print('\t'); Serial.print(analogRead(A5));Serial.print('\t'); Serial.print(analogRead(A6));Serial.print('\t');...
i have issues to set atmega324pb in sleep mode. this entry in mode sleep but te current of consume don't decreases
My sketch works using a 328p standard Arduino core, but freezes during startup using a 1284 with mightycore, Anyone know how to fix it? https://forum.arduino.cc/t/atmega1284-twi-i2c/911052/19
Hello, I am currently trying to burn the bootloader to an atmega 324PB using an Arduino Uno. It is wired up like this:  On my PCB, each of the...
I'm planning to use your Optiboot Flasher on the ATmega1284P, but there are a few things I don't understand: * I'm not sure what you're referring to by 'buffer' in...
Hi Would you consider adding live debugger support for MightyCore to Arduino IDE 2.0, or is that something you would see remaining only on Platform IO? Trying to decide what...
Hello there Latest board definition (v2.1.0) installs fine on Linux 64bit (arduino-1.8.12) but not on 32-bit Linux system (arduino-1.8.12) with error message: `Tool avrdude is not available for your operating...
