Mario Basz
Mario Basz
For example: Instead of going to G53 Z-3 , the tool goes to Z-3 (compensated by aurolevel) ... but from the current work area!!! (probably G54) Houston, we're in trouble.
If you are using automatic level and use G53 in some movement, that may be the cause of ruining the material.
number or value too large?
autolevel is very good but has some dangerous peculiarities: 1- from what you say, one is: it does not understand relative distances, it takes them as absolute. I did not...
Maybe very large code, the canvas does not show the entire route, however bCNC can send the g code. Giving it more time to visualize (button at the top right)...
Hello Pierre. She had drawn an arc. Measuring distance to the point (0.0, 0.0) gave me the wrong distance: start point or end point, depending on whether it was CW...
Sorry if I am repeating your idea, maybe I did not understand correctly: exclusion zones seem interesting to me, especially the depth limit in Z to protect the support bed...
Hello rar8000 I have cloned from your repository, I ran into these two problems: 1- When I activate the Render Settings gear, Canvas - the sheet to modify the Canvas...
1- Restarted: now I can see the Canvas parameters, however I must read your explanation: Z threshold
I am going to try. I have always used M6 with TLO and no problems.