Problem using Physical Button to command a relay

[IlMakerPragmatico]

Plugin Version 0.6.2

Question I am trying to toggle a relay, pressing a button, using these GPIO pins: PSU_BTN | GPIO23 | PIN 16 PSU_Relay | GPIO26 | PIN 37 but it seems not working.

Additional context I have tested the button with this command: watch -n 1 raspi-gpio get and its value changes pressing the button. I have so tested the relay with the commands: sudo raspi-gpio set 26 dh sudo raspi-gpio set 26 dl and it works correctly.

this is the export of the configutation: [ { "activities": [ { "execute": { "async": "False", "gpio": "26", "id": 1739103478500, "initial": "LOW", "time": "0", "value": "Toggle" }, "identifier": "GPIO26-Toggle-0ms", "type": "output" } ], "buttonMode": "Normally Open (NO)", "buttonName": "PSU Button", "buttonTime": "100", "enabled": true, "enabledWhilePrinting": true, "gpio": "23", "id": 1739102876465 } ] Shall you help me?

[IlMakerPragmatico]

I have created another button on Physical Button, with Gcode G28 command, but seems that it don't catch the button pressure. If I send the G28 code using octopi terminal, the printer performs homing.