SWL2001
SWL2001 copied to clipboard
Lora-net
cannot get geolocation example to join
Im using the LR1120 evaluation board, updated the tranceiver FW to version 0201 and am trying to run the geolocation example on it. However, i get errors stating the device is already join
INFO: Modem Initialization
INFO: Use soft secure element for cryptographic functionalities
stack_id 0
DevNonce = 0
JoinNonce = 0xff ff ff, NetID = 0xff ff ff
Region = US915
INFO: LoRaWAN Certification is disabled on stack 0
almanac_services_init
mw_gnss_scan_services_init task_id 8, service_id 0, CURRENT_STACK:0
mw_gnss_send_services_init task_id 9, service_id 0, CURRENT_STACK:0
mw_gnss_almanac_services_init task_id 10, service_id 0, CURRENT_STACK:0
mw_wifi_scan_services_init task_id 11, service_id 0, CURRENT_STACK:0
mw_wifi_send_services_init task_id 12, service_id 0, CURRENT_STACK:0
Store and fwd # scanning for filesystem...
Store and fwd # found existing filesystem, usage: 0/225
CIRCULARFS read: {0,0} cursor: {0,0} write: {0,0}
[0000] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0001] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0002] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0003] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0004] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0005] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0006] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0007] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0008] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
[0009] [v=0x00000001] [FREE ] EEEEEEEEEEEEEEEEEEEEEEEEE
get_event () callback
INFO: Event received: RESET
ERROR: smtc_modem_set_deveui call but the device is already join
ERROR: smtc_modem_set_joineui call but the device is already join
ERROR: smtc_modem_set_nwkkey call but the device is already join
ERROR: smtc_modem_set_region call but the device is already join
INFO: smtc_modem_join_network
WARN: smtc_modem_join_network call but the device is already join
Added task in supervisor for next GNSS almanac status check at 0 + 0 s
Store and fwd # format filesystem...
mw_wifi_scan_add_task: add task in supervisor at 0 + 0 s
mw_gnss_scan_add_task: add task in supervisor at 0 + 0 s
INFO: GEOLOCATION example is starting
INFO: LR11XX FW: 0x0201, type: 0x02
Enqueued RP task for Wi-Fi scan (hook_id #3)
INFO: gnss almanac task launched
WARN: No time available: 32K STOPPED
Check almanac status again in 300s
Enqueued RP task (ASAP) for GNSS almanac demodulation (hook_id #1)
INFO: gnss_almanac_rp_task_done
ALMANAC task self aborted
get_event () callback
INFO: Event received: GNSS_ALMANAC_DEMOD_UPDATE
ALMANAC_DEMOD_UPDATE info:
-- status GPS: UNKNOWN
-- status BEIDOU: UNKNOWN
-- statistics:
nb update from sat done: 0
nb update from sat success: 0
nb aborted by RP: 0
cumulative timing: 0 s
GPS progress: 0%
BDS progress: 0%
aborted: 0
Added task in supervisor for next GNSS almanac status check at 0 + 300 s
Enqueued RP task for GNSS scan at 1105 (duration 80 s)
INFO: gnss task launch at 1104 for navgroup.scan[0]
radio configure for scan done
Here is the error output when running the periodic_uplink example:
INFO: Modem Initialization
INFO: Use soft secure element for cryptographic functionalities
stack_id 0
DevNonce = 0
JoinNonce = 0xff ff ff, NetID = 0xff ff ff
Region = US915
INFO: LoRaWAN Certification is disabled on stack 0
Modem event callback
INFO: Event received: RESET
ERROR: smtc_modem_set_deveui call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 30
4): SMTC_MODEM_RC_BUSY
ERROR: smtc_modem_set_joineui call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 30
5): SMTC_MODEM_RC_BUSY
ERROR: smtc_modem_set_appkey call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 30
6): SMTC_MODEM_RC_BUSY
ERROR: smtc_modem_set_nwkkey call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 30
7): SMTC_MODEM_RC_BUSY
ERROR: smtc_modem_set_region call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 31
6): SMTC_MODEM_RC_BUSY
INFO: smtc_modem_join_network
WARN: smtc_modem_join_network call but the device is already join
ERROR: In main_examples/main_periodical_uplink.c - modem_event_callback (line 31
8): SMTC_MODEM_RC_BUSY
INFO: Periodical uplink example is starting
Please use GNU Arm Embedded Toolchain 10-2020-q4-major 10.2.1 20201103 (release) or lower version. Could you please try and let us know if issue remains ? Many thanks.
