[Feature request]: Update SONOFF TRVZB for latest Firmware

[gerricom]

Is your feature request related to a problem? Please describe

nope

Describe the solution you'd like

SONOFF released a firmware update for their TRVZB with some nice new features. It would be nice to adapt those to Z2M. This is the Changelog (source)

Schedule This feature allows you to define a custom target temperature and an end time. The device will operate at the defined temperature until the end time, after which it will revert to its previous operating mode and temperature setting.

Temperature Offset The feature can be found in the “Device Settings” page. It allows temperature calibration in ±0.2 °C increments to correct measurement deviations that may occur when the device is installed near a heat source, ensuring higher temperature accuracy.

Boost A customizable time period can be set (default: 5 minutes, adjustable from 1 minute to 2 hours 59 minutes) during which the device temperature is temporarily set to the maximum with a single tap. When the time expires, the device automatically reverts to its previous operating mode and temperature setting.

Dispaly Orientation Users can now select the actual installation orientation (horizontal or vertical). The device will automatically adjust the screen display accordingly — with the horizontal orientation as the default layout, and the vertical orientation rotating the display content by 180°.

Describe alternatives you've considered

.

Additional context

.