_TZ3000_nuenzetq (TS0002) lost options for setting inching control

[viliks]

What happened?

I do not change these values very often, so noticed just now. It seems that after update in https://github.com/Koenkk/zigbee2mqtt/issues/25668, _TZ3000_nuenzetq lost options for setting inching controls.

State of device: { "backlight_mode": "ON", "countdown_l1": 0, "countdown_l2": 0, "inching_control_set": { "inching_control_1": "ENABLE", "inching_control_2": "ENABLE", "inching_time_1": 35, "inching_time_2": 24 }, "indicator_mode": "off", "last_seen": "2025-11-02T00:21:28.734Z", "linkquality": 84, "power_on_behavior_l1": "previous", "power_on_behavior_l2": "off", "state_l1": "OFF", "state_l2": "OFF", "switch_type": "toggle", "power_on_behavior": null }

What did you expect to happen?

Be able to set options on "Exposes" tab of device.

How to reproduce it (minimal and precise)

No response

Zigbee2MQTT version

2.6.3 (unknown)

Adapter firmware version

{"build":397,"ezsp":14,"major":8,"minor":0,"patch":2,"revision":"8.0.2 [GA]","special":0,"type":170}

Adapter

EmberZNet

Setup

os: #1 SMP PREEMPT_DYNAMIC Mon Sep 8 17:03:23 UTC 2025 - 6.12.43-haos - x64 node: v22.16.0 ha: true

Device database.db entry

{"id":59,"type":"Router","ieeeAddr":"0xa4c138c4f26172b6","nwkAddr":40729,"manufId":4417,"manufName":"_TZ3000_nuenzetq","powerSource":"Mains (single phase)","modelId":"TS0002","epList":[1,2,242],"endpoints":{"1":{"profId":260,"epId":1,"devId":256,"inClusterList":[3,4,5,6,57344,57345,0],"outClusterList":[25,10],"clusters":{"57344":{"attributes":{"53251":"AQAjAwAY"}},"genBasic":{"attributes":{"65506":54,"65508":0,"65534":0,"modelId":"TS0002","manufacturerName":"_TZ3000_nuenzetq","powerSource":1,"zclVersion":3,"appVersion":82,"stackVersion":0,"hwVersion":1,"dateCode":""}},"manuSpecificTuya_4":{"attributes":{"inching":"AQAjAwAY"}},"genOnOff":{"attributes":{"32768":0,"onOff":0,"onTime":0,"offWaitTime":0,"tuyaBacklightMode":0,"moesStartUpOnOff":2,"tuyaBacklightSwitch":1}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":0,"switchType":0}},"manuSpecificTuya3":{"attributes":{"powerOnBehavior":0,"switchType":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0xdc8e95fffef1f3b1","endpointID":1}],"configuredReportings":[],"meta":{}},"2":{"profId":260,"epId":2,"devId":256,"inClusterList":[4,5,6,57345],"outClusterList":[],"clusters":{"genOnOff":{"attributes":{"onOff":0,"onTime":0,"offWaitTime":0}},"manuSpecificTuya_3":{"attributes":{"powerOnBehavior":0}},"manuSpecificTuya3":{"attributes":{"powerOnBehavior":0}}},"binds":[{"cluster":6,"type":"endpoint","deviceIeeeAddress":"0xdc8e95fffef1f3b1","endpointID":1}],"configuredReportings":[],"meta":{}},"242":{"profId":41440,"epId":242,"devId":97,"inClusterList":[],"outClusterList":[33],"clusters":{},"binds":[],"configuredReportings":[],"meta":{}}},"appVersion":82,"stackVersion":0,"hwVersion":1,"dateCode":"","zclVersion":3,"interviewCompleted":true,"interviewState":"SUCCESSFUL","meta":{"configured":332242049},"lastSeen":1762040378760}

Debug log

No response

Notes

Last health check

time: Sun Nov 02 2025 01:21:19 GMT+0100 (Central European Standard Time) os.load_average: 0.12, 0.05, 0.04 os.memory_percent: 13.115 process.memory_percent: 1.1329 process.uptime_sec: 2407

[github-actions[bot]]

This issue is stale because it has been open 60 days with no activity. Remove stale label or comment or this will be closed in 7 days

[viliks]

Still an issue with z2m 2.7.2

[DoViSer]

Still an issue with z2m 2.7.2. Device supports this option, but it's no way to change it

[andrei-lazarov]

Created a PR