Koenkk
Zigbee devices stopped responding and unable to re-pair after coordinator upgrade
What happened?
I used a USB ZBDongle-P as a coordinator. Since my Home Assistant server is relatively close to my WiFi AP, I upgraded to SLZB-06M to put it further away to avoid any interference and get better coverage. After swapping the coordinators and changing the config all devices are discovered but no updates are sent to Z2M. I tried removing one device and re-pairing, but pairing failed as well.
Z2M addon is running with the following config: data_path: /config/zigbee2mqtt socat: enabled: false master: pty,raw,echo=0,link=/tmp/ttyZ2M,mode=777 slave: tcp-listen:8485,keepalive,nodelay,reuseaddr,keepidle=1,keepintvl=1,keepcnt=5 options: "-d -d" log: false mqtt: {} serial: port: tcp://<IP of the coordinator>:6638 baudrate: 115200 adapter: ember rtscts: true disable_led: false advanced: transmit_power: 20 log_level: info log_namespaced_levels: z2m:mqtt: warning zhc: debug
What did you expect to happen?
I am expecting to be able to use the devices with the coordinator after swapping coordinators or at minimum to be able to re-pair devices.expect
How to reproduce it (minimal and precise)
No response
Zigbee2MQTT version
1.40.1 commit: unknown
Adapter firmware version
20240510
Adapter
SLZB-06M with ember
Setup
Z2M as a HA addon in a docker container on a Debian box
