Koenkk
IKEA Remotes (Tradfri 5 button E1524/E1810 and Styrbar) lost arrow left and right hold actions.
What happened?
Don't know if it has been reported before, but didn't find anything related. IKEA Remotes (Tradfri 5 button E1524/E1810 and Styrbar 4 button) lost arrow left and right hold actions. Instead they show "None" when holding. Don't want to mention how many automations it broke for me.
What did you expect to happen?
To work normally as it did before for a very long time.
How to reproduce it (minimal and precise)
Just use arrow_left_hold and arrow_right_hold actions.
Zigbee2MQTT version
1.37.0-1
Adapter firmware version
20221226
Adapter
Sonoff Zigbee 3.0 Dongle Plus
Setup
HAOS
Debug log
No response
I have the same issue with:IKEA E2001/E2002
Updated the firmware of the switches yesterday since then this issue happens.
The arrow buttons don't work anymore. Is there an option to revert the firmware of the switches?
My remotes are all updated since long time, there were no new firmware update lately. The issue is not in the firmware, reverting back to v1.36.1-1 brings back the normal functionality.
My remotes are all updated since long time, there were no new firmware update lately. The issue is not in the firmware, reverting back to v1.36.1-1 brings back the normal functionality.
Yesterday the remotes worked for me with the latest zigbee2mqtt, after I updated the ikea firmware they stopped working. The 2 Normal, buttons work, but the arrow buttons stopped working.
Reverting back zigbee2mqtt didn't solve the issue for me
+1
Luckily I decided to only update one of several remotes I own. To be clear, I use the E2001/E2002.
[UPDATE] I finally got everything working again after force removing the remote, restarting Z2M and then pairing it again. Fingers crossed it keeps working without issues. 🤞🏻
IMHO there are two separate issues with Styrbar:
- After some Zigbee2mqtt update, left/right hold actions don't work.
- After the recent firmware update, left/right tap actions don't work.
Not sure about other IKEA remotes.
Yesterday the remotes worked for me with the latest zigbee2mqtt, after I updated the ikea firmware they stopped working. The 2 Normal, buttons work, but the arrow buttons stopped working.
Reverting back zigbee2mqtt didn't solve the issue for me
I haven't done any firmware update lately because there was no recent update. My firmware version for 5 button remote is 24.4.5 with creation date 2019-04-01, and for Styrbar 1.0.024 2020-07-08. If you say that you updated recently that means that you never updated the firmware before. AFAIK, there hasn't been any change in those firmwares, so the problem is clearly in the Z2M software. In any case, reverting back to 1.36.1-1 fixes the issue. Probably you didn't reboot the whole machine after downgrading, try it.
Few days ago, zigbee2mqtt has started offering me updates for all my IKEA devices (Styrbar, Rodret, Somrig and Tretakt). The old version of Styrbar firmware was 65572, the new version is 33816593.
For some reason, they haven't appeared at once. Even various Styrbars had the updates at somewhat different time.
I have the issue OP describes with the tradfri remote E1524/E1810 - on 1.37 long press on left or right doesn't work (action produces "none"), downgrading to 1.36.1 immediately solves it.
This particular issue has nothing to do with any recent firmware/ota updates.
Glad to see that I'm not the only one experiencing this issue. Was surprised to see that those actions just stopped working all of a sudden. Don't think its tied to any OTA updates as mentioned above.
What I changed: IKEA E2001/E2002 firmware update to Firmware-Date: 20240408 Firmware-Version: 2.4.11
Zigbee2MQTT-Version 1.37.0-1 Coordinator-Typ zStack3x0 Coordinator-Version 20230507
Device: IKEA E2001/E2002 Issue: Right & Left Hold as well as Right & Left Relese do not work any longer. These triggers are also missing the HA automation Device trigger section.
As of now, I found these errors after holding the right / left buttons --- RIGHT ---- [2024-05-05 21:42:54] debug: z2m: Received Zigbee message from '0x003c84fffee35e9b', type 'commandTradfriArrowHold', cluster 'genScenes', data '{"value":3328}' from endpoint 1 with groupID 0 [2024-05-05 21:42:54] debug: z2m: No converter available for 'E2001/E2002' with cluster 'genScenes' and type 'commandTradfriArrowHold' and data '{"value":3328}' [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: <-- [254,5,69,196,237,112,1,53,117,88] [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --- parseNext [254,5,69,196,237,112,1,53,117,88] [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --> parsed 5 - 2 - 5 - 196 - [237,112,1,53,117] - 88 [2024-05-05 21:42:56] debug: zh:zstack:znp: AREQ: <-- ZDO - srcRtgInd - {"dstaddr":28909,"relaycount":1,"relaylist":[30005]} [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --- parseNext [] [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: <-- [254,27,68,129,0,0,5,0,237,112,1,1,0,142,0,225,247,64,0,0,7,21,124,17,76,9,4,7,53,117,28,251] [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --- parseNext [254,27,68,129,0,0,5,0,237,112,1,1,0,142,0,225,247,64,0,0,7,21,124,17,76,9,4,7,53,117,28,251] [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --> parsed 27 - 2 - 4 - 129 - [0,0,5,0,237,112,1,1,0,142,0,225,247,64,0,0,7,21,124,17,76,9,4,7,53,117,28] - 251 [2024-05-05 21:42:56] debug: zh:zstack:znp: AREQ: <-- AF - incomingMsg - {"groupid":0,"clusterid":5,"srcaddr":28909,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":142,"securityuse":0,"timestamp":4257761,"transseqnumber":0,"len":7,"data":{"type":"Buffer","data":[21,124,17,76,9,4,7]}} [2024-05-05 21:42:56] debug: zh:controller: Received payload: clusterID=5, address=28909, groupID=0, endpoint=1, destinationEndpoint=1, wasBroadcast=false, linkQuality=142, frame={"header":{"frameControl":{"frameType":1,"manufacturerSpecific":true,"direction":0,"disableDefaultResponse":true,"reservedBits":0},"manufacturerCode":4476,"transactionSequenceNumber":76,"commandIdentifier":9},"payload":{"value":1796},"command":{"ID":9,"parameters":[{"name":"value","type":33}],"name":"tradfriArrowRelease"}} [2024-05-05 21:42:56] debug: zh:zstack:unpi:parser: --- parseNext [] [2024-05-05 21:42:56] debug: z2m: Received Zigbee message from '0x003c84fffee35e9b', type 'commandTradfriArrowRelease', cluster 'genScenes', data '{"value":1796}' from endpoint 1 with groupID 0 --- Left --- [2024-05-05 21:44:05] debug: z2m: Received Zigbee message from '0x003c84fffee35e9b', type 'commandTradfriArrowHold', cluster 'genScenes', data '{"value":3329}' from endpoint 1 with groupID 0 [2024-05-05 21:44:05] debug: z2m: No converter available for 'E2001/E2002' with cluster 'genScenes' and type 'commandTradfriArrowHold' and data '{"value":3329}' [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: <-- [254,5,69,196,237,112,1,53,117,88] [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --- parseNext [254,5,69,196,237,112,1,53,117,88] [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --> parsed 5 - 2 - 5 - 196 - [237,112,1,53,117] - 88 [2024-05-05 21:44:08] debug: zh:zstack:znp: AREQ: <-- ZDO - srcRtgInd - {"dstaddr":28909,"relaycount":1,"relaylist":[30005]} [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --- parseNext [] [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: <-- [254,27,68,129,0,0,5,0,237,112,1,1,0,145,0,104,95,134,0,0,7,21,124,17,81,9,155,11,53,117,28,141] [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --- parseNext [254,27,68,129,0,0,5,0,237,112,1,1,0,145,0,104,95,134,0,0,7,21,124,17,81,9,155,11,53,117,28,141] [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --> parsed 27 - 2 - 4 - 129 - [0,0,5,0,237,112,1,1,0,145,0,104,95,134,0,0,7,21,124,17,81,9,155,11,53,117,28] - 141 [2024-05-05 21:44:08] debug: zh:zstack:znp: AREQ: <-- AF - incomingMsg - {"groupid":0,"clusterid":5,"srcaddr":28909,"srcendpoint":1,"dstendpoint":1,"wasbroadcast":0,"linkquality":145,"securityuse":0,"timestamp":8806248,"transseqnumber":0,"len":7,"data":{"type":"Buffer","data":[21,124,17,81,9,155,11]}} [2024-05-05 21:44:08] debug: zh:controller: Received payload: clusterID=5, address=28909, groupID=0, endpoint=1, destinationEndpoint=1, wasBroadcast=false, linkQuality=145, frame={"header":{"frameControl":{"frameType":1,"manufacturerSpecific":true,"direction":0,"disableDefaultResponse":true,"reservedBits":0},"manufacturerCode":4476,"transactionSequenceNumber":81,"commandIdentifier":9},"payload":{"value":2971},"command":{"ID":9,"parameters":[{"name":"value","type":33}],"name":"tradfriArrowRelease"}} [2024-05-05 21:44:08] debug: zh:zstack:unpi:parser: --- parseNext [] [2024-05-05 21:44:08] debug: z2m: Received Zigbee message from '0x003c84fffee35e9b', type 'commandTradfriArrowRelease', cluster 'genScenes', data '{"value":2971}' from endpoint 1 with groupID 0
FYI: Directly after the firmware update, I received errors like this; I had perform described by [TB-SE]: 2024-05-05 20:39:26Configuring '0x003c84fffee35e9b' Error 2024-05-05 20:39:28Failed to configure '0x003c84fffee35e9b', attempt 4 (Error: Device 0x040d84fffe3bda7d has no output cluster genScenes at getEndpointsWithCluster (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:30:15) at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:131:31) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:160:27) at Configure.configure (/app/lib/extension/configure.ts:121:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))
[TB-SE] (https://github.com/Koenkk/zigbee2mqtt/issues/22458#issuecomment-2094703800) • +1
Luckily I decided to only update one of several remotes I own. To be clear, I use the E2001/E2002.
[UPDATE] I finally got everything working again after force removing the remote, restarting Z2M and then pairing it again. Fingers crossed it keeps working without issues. 🤞🏻
Pushed a fix, let me know if it works!
Changes will be available in the dev branch in a few hours from now.
Pushed a fix, let me know if it works!
Changes will be available in the dev branch in a few hours from now.
I can confirm that it now works again in the dev branch. 👍
I've tried the dev version (1.37.0-dev commit: 358e2ee) with Styrbars:
- Styrbars with old firmware (firmware version 1.0.024 / build date 20200708 / HA shown version 65572) seem to work well – I get actions
arrow_{left,right}_{click,hold,release}events. (I've fully tested just one Styrbar, but I don't think others would behave differently.) - Styrbar with new firmware (firmware version 2.4.11 / build date 20240408 / HA shown version 65572) – arrow events (
arrow_{left,right}_{click,hold,release}) don't work, I just getonevent when I hold arrow_left. But maybe it is a separate issue. Is there a debug info that would be useful?
Pushed a fix, let me know if it works!
Changes will be available in the dev branch in a few hours from now.
I updated one of my STYRBAR E2001/E2002 on Friday from 1.0.024 to 2.4.11 and realized yesterday that left-right didn't worked. I tried to remove and re-pair it and after that up/down stopped working as well! I have deleted, forced deleted, rebooted etc but no response at all from any button :-( I can still remove and re-join it and on every re-join it updates the "last seen" status and it also updates last seen if I powercylcle it. But no response from any button. For quite some time yesterday I it was Offline until I gave it a new name...then it came back Online, but still no response from any button. Tried to bind functions via MQTT direct to a bulb late yesteray and could first not bind OnOff, but LevelCtrl worked and after that I also managed to bind OnOff and then up/down worked for on/off and dim up/down. Unbinded and then nothing worked again. No repsonse from buttons in MQTT console
Planned to take it back to IKEA and tell them it stopped working and see if they exchange it and maybe give me a unit with 2.4.5 and see if that works...
Do you think your fix will solve my problem? When will it be implemented in production version of MQTT? I'm not fully comfortable with trying to change to dev branch...but I really want my STYRBAR back...
@JohnBull-1975 I guess the Z2M update will not help with issues with the new firmware (see my previous post), but you can try it.
I've also noticed that Reconfigure doesn't work with Styrbars. It works neither for new nor for old firmware. The error message is very similar, but slightly different. Newlines are mine (I've added them for easier comparison), the last line is the same:
old firmware:
Failed to configure '<id>',
attempt 2
(Error: Bind <id>/1 genOnOff from '<some 3-digit number>' failed
(AREQ - ZDO - bindRsp after 10000ms) at Object.start (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:63:23) at /app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:691:28 at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:464:13) at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/ikea.ts:147:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:172:21) at Configure.configure (/app/lib/extension/configure.ts:121:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))
new firmware:
Failed to configure '<id>',
attempt 4
(Error: Bind <id>/1 genOnOff from '<some long 0xhexa>/1' failed
(AREQ - ZDO - bindRsp after 10000ms) at Object.start (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:63:23) at /app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:691:28 at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:464:13) at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/ikea.ts:147:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:172:21) at Configure.configure (/app/lib/extension/configure.ts:121:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))
@JohnBull-1975 I guess the Z2M update will not help with issues with the new firmware (see my previous post), but you can try it.
I've also noticed that Reconfigure doesn't work with Styrbars. It works neither for new nor for old firmware. The error message is very similar, but slightly different. Newlines are mine (I've added them for easier comparison), the last line is the same:
old firmware:
Failed to configure '<id>', attempt 2 (Error: Bind <id>/1 genOnOff from '<some 3-digit number>' failed (AREQ - ZDO - bindRsp after 10000ms) at Object.start (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:63:23) at /app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:691:28 at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:464:13) at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/ikea.ts:147:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:172:21) at Configure.configure (/app/lib/extension/configure.ts:121:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))new firmware:
Failed to configure '<id>', attempt 4 (Error: Bind <id>/1 genOnOff from '<some long 0xhexa>/1' failed (AREQ - ZDO - bindRsp after 10000ms) at Object.start (/app/node_modules/zigbee-herdsman/src/utils/waitress.ts:63:23) at /app/node_modules/zigbee-herdsman/src/adapter/z-stack/adapter/zStackAdapter.ts:691:28 at Queue.execute (/app/node_modules/zigbee-herdsman/src/utils/queue.ts:35:20) at Endpoint.bind (/app/node_modules/zigbee-herdsman/src/controller/model/endpoint.ts:464:13) at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/ikea.ts:147:13) at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:172:21) at Configure.configure (/app/lib/extension/configure.ts:121:13) at Configure.onMQTTMessage (/app/lib/extension/configure.ts:55:21) at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))
Ahhh...I hoped so... Do you think it will be solved in Z2MQTT or is it to purchase a few new STYRBAR with older firmware and never update...?
Ahhh...I hoped so... Do you think it will be solved in Z2MQTT or is it to purchase a few new STYRBAR with older firmware and never update...?
I guess that question is for @Koenkk
For the record. My STYRBAR E2001/2002 updated OTA to FW 2.4.11 yesterday (new from box with 1.x) and doesn't register left and right clicks. I have the latest Z2M (1.37.0) running with HA.
For the record. My STYRBAR E2001/2002 updated OTA to FW 2.4.11 yesterday (new from box with 1.x) and doesn't register left and right clicks. I have the latest Z2M (1.37.0) running with HA.
Just force remove the remote, restart Z2M and pair it again, worked for me...
For the record. My STYRBAR E2001/2002 updated OTA to FW 2.4.11 yesterday (new from box with 1.x) and doesn't register left and right clicks. I have the latest Z2M (1.37.0) running with HA.
Just force remove the remote, restart Z2M and pair it again, worked for me...
Didn't worked for me....can pair it after force remove, but no button work. No reaction at all in Z2M console. Not even "last seen" gets updated when I press a button.
My control doesn't report arrow_right_hold, arrow_right_release, arrow_left_hold, arrow_left_release anymore. But that was happening even before the firmware upgrade (but after upgrading zigbee2mqtt in the recent days).
For the record. My STYRBAR E2001/2002 updated OTA to FW 2.4.11 yesterday (new from box with 1.x) and doesn't register left and right clicks. I have the latest Z2M (1.37.0) running with HA.
Just force remove the remote, restart Z2M and pair it again, worked for me...
Worked for me as well, but only for the left/right click actions. Hold actions still don't work.
For the record. My STYRBAR E2001/2002 updated OTA to FW 2.4.11 yesterday (new from box with 1.x) and doesn't register left and right clicks. I have the latest Z2M (1.37.0) running with HA.
Just force remove the remote, restart Z2M and pair it again, worked for me...
it works for me too after upgrading from dev branch, removing the remote in z2m (no restart of z2m) , re-pair it again and give it back its previous name, thanks guys
I went to IKEA with my STYRBAR. The guy at customer service managed to pair it to one of their lamps...and then when he should show me how he did it (yes I know how it's supposed to work...) he couldn't, so he gave up and gave me a new one with firmware 1.0.024 and it just works again!!! :-) I hope someone will fix it for the future, but I will wait a good while until I try to update any of my two STYRBAR...
I've digged slightly deeper to the issue with new Styrbar firmware:
- When I press left on Styrbar with old firmware, I see raw messages and MQTT messages in logs. With new firmware, nothing appears.
- I sometimes see the following message (where
0xdeadbeefcafebabecorresponds to the ID of the updated Styrbar):
zigbee2mqtt | [2024-05-06 18:57:48] error: z2m: Failed to configure '0xdeadbeefcafebabe', attempt 2 (Error: Device 0xdeadbeefcafebabe has no output cluster genScenes
zigbee2mqtt | at getEndpointsWithCluster (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:30:15)
zigbee2mqtt | at configure (/app/node_modules/zigbee-herdsman-converters/src/lib/modernExtend.ts:131:31)
zigbee2mqtt | at Object.configure (/app/node_modules/zigbee-herdsman-converters/src/index.ts:172:27)
zigbee2mqtt | at Configure.configure (/app/lib/extension/configure.ts:121:13)
zigbee2mqtt | at EventEmitter.wrappedCallback (/app/lib/eventBus.ts:174:17))
Does a re-configure of the device helps? Press the yellow refresh button on the device page, make sure to wakeup the device before doing that.
I've tried to reconfigure the device after pressing on button multiple times, which should have been enough to wake the device up. I either get z2m: Failed to configure '0xdeadbeefcafebabe', attempt 5 (Error: Bind 0xdeadbeefcafebabe/1 genOnOff from '0x0011223344556677/1' failed (AREQ - ZDO - bindRsp after 10000ms) or z2m: Failed to configure '0x680ae2fffe7eb45b', attempt 7 (Error: Device 0xdeadbeefcafebabe has no output cluster genScenes. Maybe the former is a sign that the device isn't woke (apparently timeout after 10s) and the latter is a sign that the reconfiguration fails when the device is woke.
EDIT: Styrbar with old firmware seems to have the same issue with reconfiguring. Bat the old Styrbar firmware works even if the reconfigure fails.
@Koenkk
Pushed a fix, let me know if it works!
Changes will be available in the dev branch in a few hours from now.
I switched just some minutes ago to the dev branch and everything is working again (IKEA E2001/E2002 Firwmare 2.4.11) -> This means, that the missing actions are available again.
Details Steps I performed yesterday, not sure if still required: "Force removing the remote, restarting Z2M and then pairing it again." Stopped Zigbee2MQTT HomeAssistant Addon and also autstart, watchdog Installed Zigbee2MQTT-EDGE Assistant Addon Copied config from Zigbee2MQTT to Zigbee2MQTT-EDG Started Zigbee2MQTT-EDGE Rebooted HomeAssistant just to be sure to get the missing triggers Right/Left Release and Hold triggers are available again in the automations
Versions Zigbee2MQTT-Version 1.37.0-dev commit: b2e8b3e Coordinator-Typ zStack3x0 Coordinator-Version 20230507
Thanks
In my case, my styrbars do not report short or long actions. When I try to reconfigure it, I get the error that I attach in the image.
Seeing the latest comments and that is patently solved with the dev version. There is a release date for the official version for those of us who are not comfortable with the edge version.
I can confirm the left/right tap button behaviour missing after Styrbar firmware update with Z2M1.37.0 and ember stack. Error on reconfigure is:
Failed to configure 'Wohnzimmer STYRBAR', attempt 4 (Error: Bind 0x50325ffffe2ac628/1 genOnOff from '0x040d84fffe401de5/1' failed (Delivery failed for {"profileId":0,"clusterId":33,"sourceEndpoint":0,"destinationEndpoint":0,"options":4416,"groupId":0,"sequence":188}) at EmberOneWaitress.deliveryFailedFor (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/oneWaitress.ts:96:31) at EmberAdapter.onMessageSentDeliveryFailed (/app/node_modules/zigbee-herdsman/src/adapter/ember/adapter/emberAdapter.ts:558:30) at Ezsp.emit (node:events:517:28) at Ezsp.ezspMessageSentHandler (/app/node_modules/zigbee-herdsman/src/adapter/ember/ezsp/ezsp.ts:3957:18) at Ezsp.callbackDispatch (/app/node_modules/zigbee-herdsman/src/adapter/ember/ezsp/ezsp.ts:794:18) at Ezsp.tick (/app/node_modules/zigbee-herdsman/src/adapter/ember/ezsp/ezsp.ts:448:22) at listOnTimeout (node:internal/timers:569:17) at processTimers (node:internal/timers:512:7))
