ecl110
ecl110 copied to clipboard
Ingramz
MODBUS protocol for Danfoss ECL Comfort 110
Danfoss Link Gateway or 087H3241 is a companion device for connecting ECL Comfort 110 with Danfoss Link CC. As the name says it acts as a gateway between the RS485...
Thanks for you work on this, it helped me a lot. I tested writing to the Desired Mode on my ECL Comfort 110 application 130 and it worked. So I...
The main microcontroller used is Renesas R5F21258SN. The programming and debug interface is supposedly done via 6 pins: VCC, GND, RX, TX, RST, MODE Most of it is plain UART,...
Besides the modbus communication, I think having a simple way to test the connection and communication is valuable. I created (well, I prompted, AI produced), a script to read the...
Added a link to the stp-file for 3d-printing of the plastic part of the connector.
For later ECL (210/296/310), there is a list of MODBUS parameters (pnu) in the datasheet at https://demo.meternetpro.pl/resources/info/devices/datasheets/danfos_ecl310.pdf (pages 45-60) I would expect many of these to overlap with the ECL110....