HomeAssistantNotes

HomeAssistantNotes copied to clipboard

Connectivity reliability issues with Ring Keypad v2

8

Not sure if anyone else has ran into this? We've been having intermittent issues where the keypad would flash the red 'network' light on the front and would not send/receive...

davidcoulson

Aligned some features closer to native Ring behavior

7

Made it so you can directly switch between armed modes without having to disarm first. Also extended it so you could change mode while it's still arming, although this is...

SEKCobra

Exit and entry codes - 60 sec

1

Hi. After reading your documentation i was pretty disappointed that 60 sec exit and entry codes dont exist for V1, but then i have tried property values 70 and 71...

Dinth

Hi. Would you mind adding an entry and exit indication to V1 blueprint please? It should be pretty straightforward, the automation add screen could have drop down menus to set...

Dinth

Keyboard v2 value: 0 works better

1

Hi, I tested with a Keyboard v2. With action "Z-Wave JS: Set a value on a Z-Wave device (Advanced)" it worked better with "value: 0" (button light on) rather than...

sergeyshap1981

Should bypass functionality work with this blueprint?

6

When im trying to arm an alarm with one of the sensors triggered, Ring keypad asks me to bypass but when i enter the code for the second time nothing...

Dinth

Night mode and

3

Hello, I'm having trouble with the night mode. When it is activated, the "alarm off" mode is displayed (bleu logo) on the keypad. What happens if the alarm is triggered,...

Idaho947

Ring Keypad V2 Home Assistant

2

How do I configure one button on the ring keypad V2 to night mode for alarmo in home assistant?

Grosscoder

Hi, I have downloaded the latest blueprint for Alarmo. The communication between Alarmo and the Ring Keypad V2 should work as I receive all the information of the security system...

m4v3r1ck1

Howdee, I am trying to use the Fire button and switch on the alarm on the keypad. So press-hold the button, triggers an event and that sends a zwave command...

dannybloe