No discvery for wt32-sc01-plus_16MB

[pauldogg]

Similar / relevant https://github.com/HASwitchPlate/openHASP/discussions/445#discussioncomment-8348998

I have a wt32-sc01-plus_16MB that will not become discovered; and therefore cannot be setup in home assistant.

openhasp 0.7.0-rc10 fb2bebf

HACS version 1.34.0 I've tried changing openHASP to 0.7 (from 0.6.3) also 0.7.1, rebooted the device and home assistant with no discovery...

MQTT shows as connected in the information tab of the device.

MQTT Server | XX.XX.XX.XXX Username | XXXXX Client ID | plate_36b164 Status | Connected Received Published | 32 Failed

Display with the UI on the device seems to work fine.

Pages.json:

{"page":1,"id":1,"obj":"btn","x":0,"y":0,"w":240,"h":30,"text":"openHASP","value_font":22,"bg_color":"#2C3E50","text_color":"#FFFFFF","radius":0,"border_side":0} {"page":1,"id":2,"obj":"btn","x":10,"y":40,"w":105,"h":90,"toggle":true,"text":"\uE335","text_font":32,"mode":"break","align":1} {"page":1,"id":3,"obj":"dropdown","x":10,"y":140,"w":170,"h":30,"options":"Apples\nBananas\nOranges\nMelon"} {"page":0,"id":1,"obj":"label","x":175,"y":5,"h":30,"w":62,"text":"00.0°C","align":2,"bg_color":"#2C3E50","text_color":"#FFFFFF"}

openhasp.yaml:

plate35: objects:

• obj: "p0b1" # temperature label on all pages properties: "text": '{{ states("sensor.my_room_temperature") }}°C'
• obj: "p1b2" # light-switch toggle button properties: "val": '{{ 1 if states("light.my_room") == "on" else 0 }}' "text": '{{ "\uE6E8" if is_state("light.my_room", "on") else "\uE335" | e }}' event: "up":
• service: homeassistant.toggle entity_id: "light.my_room"
• obj: "p1b3" # dropdown event: "changed":
• service: persistent_notification.create data: message: I like {{ text }}

Any help would be greatly appreciated. Thanks

[MikeJoss]

I got mine to discover by removing the plate from the openhasp.yaml. With anything in there about this plate it would not dioscover. I have two of these plates, leaving the first one's config in openhasp.yaml was fine. Removed all the config for the second one, restarted HA and restarted the plate and it discovered.

Hope that helps.

[MikeJoss]

Oh, and after that, if you get an error starting the integration, make sure you have put the config for it back into openhasp.yaml and restart the integration.

[fvanroie]

We've added ùDNS discovery in the lastest nightly build of the firmware and 0.7.2-RC ee7172a of the Custom Component. This should fix the issues with delayed discovery.

[TheITGeorge]

Thanks that's kinda worked partly for me. I was running the stable 0.6.6 on homeassistant, then my 2 wt32-sc01-plus_16MB where not detected in openhasp. While looking in MQTT with MQTT explorer I saw that they creating topics. But after upgrading to 0.7.2-RC they are detected however they are not working.

Openhasp give me on both sc01's a error "no devices or entries"

I already tried reboot HA, the SC01's, removing there configuration from openhasp.yaml

My old Lanbon L8 is still running fine (on firmware 0.6.3)

[TheITGeorge]

It turned out in my case it was a user error... i made a typo... twice... 😅 I called my screens CS01 and CS02, and in the config i accidentally typed in SC01 and SC02, i guess it was very late for me. But after correcting the names in the config and rebooting HA it all started to work 🥳

[fvanroie]

Can this issue be closed now?