Dynamips hypervisor process has stopped, return code: -11

[bazzawill]

I am getting this error: Dynamips hypervisor process has stopped, return code: -11 C3725 'Ghost': generic_nvram_extract_config: Unknown error -61605

This happens when s0/0 is configured on either R1 and R2 (configured similar to below) but not when I configure f0/0 on either router. I did see the bug from 2018 about compiling the i386 version just wanted to check if that would still be a viable solution or if this is a different bug

Running GNS3 and dynamips on arch linux

Router R1 is stopped Running on server mythbox with port 3080 Local ID is 1 and server ID is 376bdbb8-e6d0-469f-ac63-78c9dcbe1abe Dynamips ID is 1 Hardware is Dynamips emulated Cisco c3725 with 256MB RAM and 256KB NVRAM Console is on port 5001 and type is telnet, AUX console is on port None IOS image is "c3725-advsecurityk9-mz.124-3.image" with idlepc value of 0x60752990, idlemax of 500 and idlesleep of 30 ms PCMCIA disks: disk0 is 0MB and disk1 is 0MB slot 0 hardware is GT96100-FE with 2 ports FastEthernet0/0 connected to Switch1 on port Ethernet0 FastEthernet0/1 is empty WIC-2T installed in WIC slot 0 with 2 ports Serial0/0 connected to R2 on port Serial0/0 Serial0/1 is empty WIC-2T installed in WIC slot 1 with 2 ports Serial0/2 is empty Serial0/3 is empty