Framework-Laptop-13

Framework-Laptop-13 copied to clipboard

…ouchpad PCB, as described by nrp [here](https://community.frame.work/t/input-connector-shim-for-power-switch-usb-2-0-and-leds/21430/2)

CRImier

Starting the helper and inspiration material list

1

CRImier

Starting a small list of community resources for mechanical design

1

CRImier

Adding a FAQ section

1

CRImier

SLDPRT Files for Mainboard Case

6

I suppose this is a feature request of sorts, but I work in solidworks and would love to use these solid models natively. Do you have SLDPRT files available? Do...

GraffJosh

It'd be quite helpful to have high-res pictures of the mainboard. There's gotta be some already available, that were used to create pictures in [this listing](https://frame.work/products/mainboard). Such pictures are useful...

CRImier

I see there's a bottom cover version r and version l, does that mean you can't fit both the audio board and wifi?

mrtorrence1

I'm currently about half way through printing the bottom left portion of the case and have just noticed that the case will be about 0.1mm off dimension because I printed...

KasimAhmic

Publish dimensioned prints for the printable case

1

Hello, I was happy to find your .stl / .stp files for the printable case, but I was wondering if you would agree to publish a less opinionated type of...

doriancransac

Can you post the FAN CAD models. We have the heatpipes with the MainBoard CAD but not the actual FAN assembly. Thanks!

consistent-bee