Firmware

Firmware copied to clipboard

Problem with Fettec Alpha Firmware on G4 aio 35A and Tracer receiver

1

I have an fettec G4 aio 35A with tracer receiver and used it before with kiss firmware when i changes´d the firmware to rettec alpha the receiver is not recognesed...

rbasken

Bidirectional DSHOT

25

Hi, Is there a chance that bidirectional dshot will be supported eventually? Really like the hardware so far :+1:

bkleiner

When I set up the camera and video feed, the ESC's blue light blinks and beeps every few seconds

Addison666

I have another issue when I update FC in configurator, and next I can not get step to update OSD

Addison666

Fettec esc 45A only red led and don't beep

1

I mounted the esc and soldered the motor and xt60. Power on and the esc beep and work, but when I mounted the fc, the Osd fettec and vtx the...

salvatore-per

RTH on failsafe is not working

1

 not sure if its a known issue, but the feature is not working, only manual RTH launch is fine

hitorix

Fettec G4 RTH failsafe checkbox cannot be saved

1

GPS has already connected to FC and got sat well, but RTH failsafe setting will disappear after pressed save button on KISS GUI.

r980ah

Hy, I need a little help, built 2 brand new quads, Apex with EcoII 2306 2400kv 4S Fettec F7 and Fettec 35A ESC, original Caps, I build quads for a...

Taboaco

New unboxed and mounted, updated to latest release stable than set onewire on kiss gui ( fettec f7) . Run motor test and there big desync of 2 motors

spacebubi

FETtec stack issue

4

Hi I have 3 new builds with FETtec full stact FC and 45amp 4in1 ESC. Newest Kiss gui and ESC configurator. I tried to flash multiple firmwares on FC 46i,46y,46o...

GuyWithDrones