datvplutofrm
datvplutofrm copied to clipboard
F5OEO
Digital Television custom firmware for PlutoSDR
the firmwire runs on plutoplus. connecting via usb is working fine. eth0 on the plutoplus is not available, so it can not be accessed via the gigabitethernetport. the ethernet-chip is...
- Correct tscalc in wbe pluto.php - Remove datv startup and launch only process according to "mode" setup - publish incoming bitrate (mqtt) - publish modulator status (underflow, overflow, waiting...
Remux option is not well displayed on on interface , even setting.txt is savec with the right parameter
A file /www/releasenote.txt contains git history should be displayed in web interface.
A general webpage for setting all global parameters actually included in config.txt ===== Network ======== Hostname : pluto USBEthernet : ip : 192.168.2.1 iphost : 192.168.2.10 netmask : 255.255.255.0 gateway...
Thanks for great, useful and interesting repo. As I understand "board/pluto" folder contains precompiled binary tools, scripts, webpage etc. 1) Is it possible to use stock pluto firmware with these...
At a fresh install no parameters are set in fw_env. pluto_dvb is running with 50% cpu because lack of parameters. 1144 1043 root R 12996 3% 50% /root/pluto_dvb -m -c...
Hi. I am attempting to port your excellent work to the newest plutosdr-fw (v0.37) but since v0.36 they have moved from glibc to uClibc and using the internal toolchain of...
