FlatCAM
FlatCAM copied to clipboard
Denvi
https://bitbucket.org/jpcgt/flatcam
I had problems trying to open an Excellon file generated in KiCad v8.0.1, FlatCAM (beta_8.994_x64) complains that "it is probably not an Excellon file". Various iterations of the KiCad Excellon...
Hi, at first thank you for this awsome piece of Software. I want to report an issue, on the **8.994 BETA Version** with the Z-Axis. The Problem is i use...
How to reproduce: 1. I select and double click my .gbr file from the project tab 2. I click "NCC Tool" 3. There are two tools in the "Tools Table"...
I found this discussion about how to make FlatCAM not route the outside edge of the board. This works, as long as the outside edge toolpaths fully enclose the board:...
Hi guys, I've been using flatcam for about a year to design pcbs and acrylic and wood cuts, during all this time I used version 8.993, it showed difficulties when...
FlatCAM 8.994 g-code import is not so robust. 6 circles expected to be shown. only 3 of them accepted as correct. ``` G21 G90 G17 G0 X0 Y10 Z0 G2...
Good day. When importing drill files into mm, the data is not transferred correctly. The problem exists in all versions. Please correct.
Is there any way to use two tools? one for the biggest tracks and one for the details? that would make the manufacturing process faster. this feature is included by...
Hello I am new to python and do not understand how to launch this version but I love flatcam and need Clear non-copper funcion could you explain how to install...
There an issue at https://bitbucket.org/jpcgt/flatcam discussing offsetting all the files. In may case the gerbers and excellon files from KiCAD are referenced to the PCB editor 0,0. This is always...
