schema-dev
schema-dev copied to clipboard
DIGGSml
Development repository for DIGGS Schema Files. The latest updates are found here.
Where soil graphics standardized as part of this mission? And what standard is in use?
We need codelists for triaxial tests - ones for total stress and another list for effective stress. The total stress values I propose are: UNC - unconfined compression test UU...
Roles
@dponti Do we have a set of valid values for the Role object? I think we need things for at least the following: Driller Driller Operator (CPT) Logger Drilling Contractor...
There was a unit previously available in 2.5 that is not present in 2.6. There is lbf/ft2 (psf) but there is not lbf/in2 (psi) pound-force per square foot
Where is the right place to map the Chiselling Start Time in the schema? If an Abstract Event needs to be defined under the Chiseling element, then how to tie...
In the AGS standard there are two particle size percentages that are used for oversize correction, but in the ASTM Standards there are 3 particle sizes used for oversize correction....
I believe the forcePerTimeMeasure enumerations are incorrect. These appear to mostly be PressurePerTime. forcePerTime should be something like a N/s or lbf/sec. We need to correct this to have both...
There are 2 issues with the Advancement element in the schema: 1- There is no place to map the "Readings set reference [AGS Standard field]" in the element, unless it...
We have an issue with the energyDensity element where it's uom attribute doesn't seem to be valid. The units of measure are in the kernel for it, but I don't...
I believe we may need to add a PPMV unit of measure for the volumepervolume unit of measure type. Refer to the attached. https://askanydifference.com/difference-between-ppm-and-ppmv-with-table/ AGS indicates that the IFID test...