CrumpLab
Not able to install packages
I can't seem to install the packages on r cloud and R studio will not download on my laptop. I basically finished both labs in class but I can't seem to open them.
In Rstudio cloud, you should wait for about 10 seconds for the installation to start. Also make sure you have the console opened.
For example, type this command in the console and wait for few seconds and tell me what happens:
install.packages(“ggplot2”)
On Fri, Sep 7, 2018 at 12:15 PM ElisaGeorge93 [email protected] wrote:
I can't seem to install the packages on r cloud and R studio will not download on my laptop. I basically finished both labs in class but I can't seem to open them.
— You are receiving this because you are subscribed to this thread. Reply to this email directly, view it on GitHub https://github.com/CrumpLab/psyc3400/issues/8, or mute the thread https://github.com/notifications/unsubscribe-auth/AHDBIP8DN7zc6brGgTrNR_VeuHPjkfhJks5uYpuHgaJpZM4WfG1l .
Thank you i was finally able to install the packages but i can't seem to unzip the rmarkdownlab file to be able to open the lap temples in R
You just upload the zip file, it will be unzipped for you automatically.
On Fri, Sep 7, 2018 at 1:15 PM ElisaGeorge93 [email protected] wrote:
Thank you i was finally able to install the packages but i can't seem to unzip the rmarkdownlab file to be able to open the lap temples in R
— You are receiving this because you commented. Reply to this email directly, view it on GitHub https://github.com/CrumpLab/psyc3400/issues/8#issuecomment-419507005, or mute the thread https://github.com/notifications/unsubscribe-auth/AHDBIK671h-IbV8sHfTwQrGv3gISLP9jks5uYqmwgaJpZM4WfG1l .
Its not allowing me to open the lab temples in the Rcloud. I've tried several times
If you upload the zip file, go to RMarkdownLabs, then go to LabTemplates. You should find all lab templates in there.
Of course, to work on your lab, you should copy the file (or move it) to the parent folder called (RMarkdownLabs).
I see the lab temples but I'm unable to select them/copy them/move them
You should copy or move them by first cicking on the little box next to file name, and after that you go to "More" and choose "Copy to" or "Move". In either case, you will need to select the parent folder (named "RMarkdownsLab") and then click on "choose".
Let me know if that does not work with you.
Here is a little picture that have both the little box and the "More" option.
I just keep getting an error message. Im not sure what I'm doing wrong