opensand
opensand copied to clipboard
CNES
Dear Opensand developers, I'm using OpenSand in a simple configuration: one ST, one GW and one SAT. On the LAN GW there is another VM with an Iperf server, and...
Hi, i would like to ping the sat entity from the gateway or the sat-terminal, with a "total delay" that is the double of the propagation delay imposed by the...
Hi, Just trying opensand for the first time, and had difficulty running the ethernet cli example. I had to correct a number of the xml files. Please find them as...
Just updated opensand to 6.1, using "openand-network setup -g 6 -s 2 -t 3" to setup network. Both SAT2 and ST3 are initialized okay, but GW6 has errors and will...
Dear OpenSand team, while implementing the Ethernet configuration using OpenSand_CLI, i found that there are several packet drops from one WS to the other one. The ping on from one...
Hi, I was testing OpenSand using the CLI scripts under the configuration 'ethernet_vlan_tagged_packets_keep_tag_on_bridge' (I guess the same issue is valid also for all ethernet configuration). ➡️ I reproduced the configuration...
what is the default transmission power? Can I change it? thank you
By reading through the [usage page](https://github.com/CNES/opensand/blob/master/opensand-deploy/doc/usage.md), unfortunately, it's still VERY HARD to form clear and coherent connections between the steps. And most of them are totally ambiguous and baffling. BC...
I tried to evaluate and carry out the configurations, through both opensand itself or opensand-network. But it failed on schemas. I have no idea about how it failed. There is...