Builty
Esp32-s3 lcd 1.9
I would like you to clarify a doubt and help me. I bought the ESP32-S3 LCD 1.9 board, but it is a different model than the one on your website. This was the model I purchased: https://a.aliexpress.com/_mNAc6GT. Does it work normally to control the Tonex One? Thank you very much
Hi. That board is not currently supported, however I am working on another one that has the same LCD display, so I already have a UI design and screen drivers done. I have ordered one of these Waveshare boards, which will arrive tomorrow. I think I should be able to add support for it quickly.
Thank you. In that case, in the future, will this board I purchased (ESP32-S3 LCD 1.9) work perfectly controlling the Tonex One?
Acho que vai ficar tudo bem.
Thanks. I will look forward to controlling the Tonex One through this ESP32-S3 LCD 1.9 board.
Hi, friend! Have you managed to program this board model so that it is compatible with the Tonex One? Thanks
Hi. I have it coded, but its not working properly yet. I am in the process of debugging it.
Hi Greg, I followed the instructions to power up the 1.9 board, but it won't power up when I connect it to 9V power. I'm using the board that converts 9V to 5V. What's wrong?
Hi. It looks like you have the + and - wires backwards. Please check this area carefully.
Greg, I reversed the wires, but the board didn't turn on. Actually, something strange is happening. When I connect the 1.9 board to my power supply (Vitoos DD5 SV2), the power supply light goes out, and when I disconnect the 1.9 board from the Vitoos power supply, the power supply light comes back on. I tested with another power supply (Visual Sound ISPOT), and the 1.9 board didn't turn on either. However, if I connect the 1.9 board directly to the power supply or with the USB-C cable connected to the PC, the light turns on normally.
Hi. Did you adjust the little "trimpot" on the 9v to 5v board to make sure it is outputing 5 volts? This is very important.
With the light turning off, I guess its taking too much power from the power supply. What is the rating of the power supply output? You would need at least 500 mA at 9 volts. Or, it might indicate that there is a short circuit somewhere in the power area.
Hi Greg, could you tell me what software I should install on my 1.9 touch card?
Hi. The Waveshare 1.9" uses this release: https://github.com/Builty/TonexOneController/blob/main/Releases/V2.0.1.2/TonexController_V2.0.1.2_Waveshare_1_9.zip
Greg, as shown in the photo, when I try to extract the file, this message appears: no files found.
I checked my master zip file, and also downloaded the zip again from Github. Fort me it opens OK. Maybe try to download again?
Also make sure to download this way:
Greg, I did exactly as you said, but the file is still giving an error and it shows the same message I sent in the previous photo: File not found. I downloaded it from the website (PC) and also from my cell phone, but neither file worked. I tried downloading others (e.g., Waveshare_4_3B_Display) and none of them work; it shows the same message, as if no file existed.
https://github.com/user-attachments/assets/542dc49f-7e5d-4016-868a-e8c5e6018d5f
Please try opening the zip with the built-in Windows zip tool. Or some other zip tool. I think Winrar is confused somehow. Or upgrade Winrar to the latest. Winrar on my PC opens the files OK.
Also check your antivirus software. Maybe its interfering?
I updated WinRAR and now it's working normally. Thank you so much, Greg!