ArthurMitchell42
fyi: APC Back-UPS RS 1500MS2 data dump example
Here is data dump from apcaccess for Back-UPS RS 1500MS2 APC ups.
root@nix:~# apcaccess
APC : 001,036,0866
DATE : 2025-01-07 20:36:08 +0000
HOSTNAME : nix
VERSION : 3.14.14 (31 May 2016) debian
UPSNAME : nix
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
STARTTIME: 2025-01-06 19:07:59 +0000
MODEL : Back-UPS RS 1500MS2
STATUS : ONLINE
LINEV : 123.0 Volts
LOADPCT : 3.0 Percent
BCHARGE : 100.0 Percent
TIMELEFT : 180.0 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
SENSE : Medium
LOTRANS : 88.0 Volts
HITRANS : 144.0 Volts
ALARMDEL : No alarm
BATTV : 27.3 Volts
LASTXFER : Unacceptable line voltage changes
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
SELFTEST : NO
STATFLAG : 0x05000008
SERIALNO : 0B2432L4XXXX
BATTDATE : 2024-08-10
NOMINV : 120 Volts
NOMBATTV : 24.0 Volts
NOMPOWER : 900 Watts
FIRMWARE : 969.e4 .D USB FW:e4
END APC : 2025-01-07 20:36:35 +0000
Dump from Format_APC_Data(Scrape_Lines):
APC : 001,036,0866
DATE : 2025-01-07 22:38:11 +0000
HOSTNAME : nix
VERSION : 3.14.14 (31 May 2016) debian
UPSNAME : nix
CABLE : USB Cable
DRIVER : USB UPS Driver
UPSMODE : Stand Alone
STARTTIME: 2025-01-06 19:07:59 +0000
MODEL : Back-UPS RS 1500MS2
STATUS : ONLINE
LINEV : 123.0 Volts
LOADPCT : 3.0 Percent
BCHARGE : 100.0 Percent
TIMELEFT : 180.0 Minutes
MBATTCHG : 5 Percent
MINTIMEL : 3 Minutes
MAXTIME : 0 Seconds
SENSE : Medium
LOTRANS : 88.0 Volts
HITRANS : 144.0 Volts
ALARMDEL : No alarm
BATTV : 27.3 Volts
LASTXFER : Unacceptable line voltage changes
NUMXFERS : 0
TONBATT : 0 Seconds
CUMONBATT: 0 Seconds
XOFFBATT : N/A
SELFTEST : NO
STATFLAG : 0x05000008
SERIALNO : 0B2432L4XXXX
BATTDATE : 2024-08-10
NOMINV : 120 Volts
NOMBATTV : 24.0 Volts
NOMPOWER : 900 Watts
FIRMWARE : 969.e4 .D USB FW:e4
END APC : 2025-01-07 22:38:24 +0000
Thanks for spotting this, let me take a look and get back to you.
(Ô,Ô) ({::::}) =WW===- Sent by owl post
From: suddencoffee @.> Sent: Tuesday, January 7, 2025 10:41:23 PM To: ArthurMitchell42/nutcase @.> Cc: Subscribed @.***> Subject: Re: [ArthurMitchell42/nutcase] fyi: APC Back-UPS RS 1500MS2 data dump example (Issue #73)
Dump from Format_APC_Data(Scrape_Lines):
APC : 001,036,0866 DATE : 2025-01-07 22:38:11 +0000 HOSTNAME : nix VERSION : 3.14.14 (31 May 2016) debian UPSNAME : nix CABLE : USB Cable DRIVER : USB UPS Driver UPSMODE : Stand Alone STARTTIME: 2025-01-06 19:07:59 +0000 MODEL : Back-UPS RS 1500MS2 STATUS : ONLINE LINEV : 123.0 Volts LOADPCT : 3.0 Percent BCHARGE : 100.0 Percent TIMELEFT : 180.0 Minutes MBATTCHG : 5 Percent MINTIMEL : 3 Minutes MAXTIME : 0 Seconds SENSE : Medium LOTRANS : 88.0 Volts HITRANS : 144.0 Volts ALARMDEL : No alarm BATTV : 27.3 Volts LASTXFER : Unacceptable line voltage changes NUMXFERS : 0 TONBATT : 0 Seconds CUMONBATT: 0 Seconds XOFFBATT : N/A SELFTEST : NO STATFLAG : 0x05000008 SERIALNO : 0B2432L4XXXX BATTDATE : 2024-08-10 NOMINV : 120 Volts NOMBATTV : 24.0 Volts NOMPOWER : 900 Watts FIRMWARE : 969.e4 .D USB FW:e4 END APC : 2025-01-07 22:38:24 +0000
— Reply to this email directly, view it on GitHubhttps://github.com/ArthurMitchell42/nutcase/issues/73#issuecomment-2576364283, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ATTOABT5UQYEC2UMFJZ7KYL2JRJZHAVCNFSM6AAAAABUYUZV2OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKNZWGM3DIMRYGM. You are receiving this because you are subscribed to this thread.Message ID: @.***>
@ArthurMitchell42 This is only meant as an example of data for this particular APC model in case you need it for testing. This issue can be closed.
Thank you, I really appreciate your effort. I don’t have an APC device myself so I have to use an emulator to debug the APC mode.
(Ô,Ô) ({::::}) =WW===- Sent by owl post
From: suddencoffee @.> Sent: Monday, January 13, 2025 8:42:58 PM To: ArthurMitchell42/nutcase @.> Cc: Arthur Mitchell @.>; Mention @.> Subject: Re: [ArthurMitchell42/nutcase] fyi: APC Back-UPS RS 1500MS2 data dump example (Issue #73)
@ArthurMitchell42https://github.com/ArthurMitchell42 This is only meant as an example of data for this particular APC model in case you need it for testing. This issue can be closed.
— Reply to this email directly, view it on GitHubhttps://github.com/ArthurMitchell42/nutcase/issues/73#issuecomment-2588154335, or unsubscribehttps://github.com/notifications/unsubscribe-auth/ATTOABS7D7JH322OGZDXMGD2KQQNFAVCNFSM6AAAAABUYUZV2OVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDKOBYGE2TIMZTGU. You are receiving this because you were mentioned.Message ID: @.***>