CanBoot

CanBoot copied to clipboard

Flashing over CAN not working with Big Tree Tech EBB36 v1.2 from BTT U2C v2.1

31

Currently you can flash CanBoot onto the device and it's recognized over the CAN network, but then trying to flash Klipper, it ends with a bunch of errors during the...

Norbs12

Support for STM32H743 on the BTT SKR 3 and SKR 3 EZ

10

Please provide support for STM32H743; this is a processor being used on the NEW BigTreeTech boards. CanBoot makes it easy to update without jumping through hoops or SD cards. I...

NAPCAL

SKR V1.4 Turbo unable to reflash klipper

8

I was able to flash Canboot onto the SKR V1.4 using a raspberry pi connected to the board via UART using the tft pins and lpc21isp command below. lpc21isp -wipe...

Bazeone

Update flash_can.py

1

Added the default values to the -h output.

xsnoopy

Update README.md

1

Added some missing text.

xsnoopy

Simple one-line fix

clee

CanBoot Issues with Klipper "USB to CAN bus bridge" Device

6

@Arksine Can CanBoot be optimized to work with the Klipper "USB to CAN bus bridge" communication? The bridge device is seen as a serial device when you enter the bootloader...notably...

idontknowtom

CanBoot Moonraker Update Manager

8

Hello, maybe an update manager entry would be a cool feature, but I'm not sure if it would be such a useful feature, CanBoot updates should happen very rarely.

0xUnkn0wN

Hello, while trying to upload firmware I get this errors. Could you help me what could be wrong please? For upload I use RS485 CAN HAT and on RPI Node...

JoshSK

[Feature Request] add an user definable device name

2

Add a user-definable device name that will be provided with the CAN bus ID when running flash_can.py -q Since the direction for using the CAN bus will head toward multiple...

NAPCAL