ArduCAM
AGX Orin can't detect IMX477 even after installing the driver.
Hi there, I'm using Jetson AGX Orin with Jetpack 5.1.1, and 5.1.2 I purchased the SKU:B0473 from arducam, and installed the driver in release. I installed the driver using command "./install_full -m imx477". Here, the driver isn't detected, but seldomly when I check the booting message with "sudo dmesg | grep -E "imx477|imx219|arducam". (I can only see "arducam"). Additionally, sometimes the driver is detected, but still it doesn't detect the camera, which means "ls /dev/video*" cannot find anything. Since I connected the camera and the board I received from Arducam, I think it has to works. (I followed the quick start guide, and checked the troubleshoot) Quickstart: https://docs.arducam.com/Nvidia-Jetson-Camera/Nvidia-Jetson-Orin-Series/NVIDIA-Jetson-AGX-Orin/Quick-Start-Guide/ Troubleshoot: https://docs.arducam.com/Nvidia-Jetson-Camera/Native-Camera/Toubleshoot/ Could you check the driver deb file if it has any problem or not? Thank you in advance.
Hi, Let's contact with each other in the email. We need to check your device remotely.
hi @Dion4cen, we're experiencing similar issues. the cameras are detected in 1 out 5 times after the driver is re-installed and jetson orin rebooted. we are using B0473 multi-camera adapter as well.
$ cat /etc/nv_tegra_release
# R35 (release), REVISION: 4.1, GCID: 33958178, BOARD: t186ref, EABI: aarch64, DATE: Tue Aug 1 19:57:35 UTC 2023
$ uname -r
5.10.120-tegra
$ sudo dmesg | grep -E ardu
[ 0.005153] DTS File Name: /home/jenkins/agent/workspace/x_orin_kernel_l4t-35.4.1-arducam/kernel/kernel-5.10/arch/arm64/boot/dts/../../../../../../hardware/nvidia/platform/t23x/concord/kernel-dts/tegra234-p3701-0005-p3737-0000.dts
Hi Alona,
This hardware version does have similar issues. We have upgraded the hardware and you can contact the market for replacement.
You can contact [email protected] for further steps.