SAT
SAT copied to clipboard
Alexwijn
The Smart Autotune Thermostat (SAT) is a custom component for Home Assistant that works with an OpenTherm Gateway (OTGW).
### Context Note: I believe there are already intentions to tackle the MM=0 problem using different approach, so this github issue is here to outline my system and to help...
I have OTmonitor publishing to /events/central_heating/otmonitor. When I try to setup SAT with MQTT gateway and I use otmonitor for the "top topic" I get "No matching devices fount" when...
First of all: thanks for putting in the effort, I'm following this with great interest. I would like to see if I can implement this in my case: - OpenTherm...
My geminox gas boiler returns 4 as the ID3:LB value. I added 2 missing sensors for the esphome implementation, they are based on the default names in olegtarasov's branch, but...
On v3 I can configure SAT with automatic gains calculation, on v4 this times out after 10 minutes without ever having started anything it seems: ``` 2025-01-06 21:45:37.911 WARNING (MainThread)...
Hi Running SAT for over a year now, but the climate controle is stopt working. showing unavailable.  I am running in Docker, HA version is 2025.4.1, connection to OTGW...
## Summary by CodeRabbit * **New Features** * New services: reset PID integral and enable/disable pulse‑width modulation. * New sensors: Flame Status, Flame Health and Boiler Health. * Added manufacturers:...
The tabs when configuring SAT appear to contain different options than described in README.md. ### General SAT 4.1.2 install in HA (in Dutch, but you get the point):  Differences...
## Summary by CodeRabbit ## Release Notes - **New Features** - Introduced room weight configuration to allow for weighted temperature control across different areas. - Added ability to identify a...